|
| |
Martindales
Martindale abrasion Pilling tester
Used Martindales in stock
The latest Martindale for cloth abrasion or fabric pilling
comes in a 4, 6 or 8 head format.
| The machine conforms to BS
EN, ISO, ASTM, Marks and Spencer and DIN standards as well as other national
standards. |
| The control system has
been especially developed for the Martindale APS and provides a host of
options and information which make testing easier. |
| The machine is
available with 4, 6 or 8 workstations and all feature the same state of the
art control system. |
| Comparative Check List |
| |
 | Choice of three operating modes |
|
| |
|
| |
| Standard Mode, giving one preset value for all
positions. |
| Multiple Preset Mode, all workstations can be set
to different preset values allowing multiple tests on one machine, also
any user influences can be allowed for within the test as each workstation
will stop the machine when its count has been achieved. |
| Counter Profile mode, up to 5 individual counters
can be preset to different values, allowing tests to be pre configured at
the start. |
|
| |
|
| Counters can be turned on or off for any position
at any time, giving the user the facility to check one workstation whilst
continuing to run the other workstations. |
| Individual counter per position. |
| Individual Alarm per workstation, when in Multiple
Preset Mode. |
| Time remaining per workstation, when in Multiple
Preset Mode. |
| Progress bar and time of finish, allowing the user
to manage their time around the test cycle. |
| Abradant check alarm, with individual alarms for
each workstation. |
| Integrated motor protection within the controller.
|
| Integrated help pages. |
| Other languages available on request
|
|
|
